Sika Everbuild’s two steps to the perfect porcelain patio

As the popularity of porcelain patios and paving continues to soar, merchants can help their customers achieve professional results from start to finish with SikaCeram® FlowFix bonding primer and jointing compound system.

Part of Sika Everbuild’s high-performance range of landscaping solutions, SikaCeram®-62 FlowFix Bonding Primer provides an exceptional bond between porcelain paving and the bedding mortar. SikaCeram®-62 FlowFix Bonding Primer can be applied by brush or roller to the underside of the paving during installation to increase the bond strength between the paving slab and mortar bed. It’s ready to use when mixed with just water and is fully cured in 72 hours. SikaCeram FlowFix

Once installed, the porcelain paving tiles can be finished with SikaCeram®-621 FlowFix  Jointing Compound, a controlled, cementitious flowable jointing grout. Easy to use by mixing with water on site, SikaCeram®-621 FlowFix Jointing Compound is suitable for joints between 3-10mm wide and 20mm in depth and is poured on and worked into the joints using a squeegee. Fast and effective, the jointing compound can cure in as little as 60 minutes, depending on site conditions, to achieve a non-permeable finish and is available in Light Grey, Dark Grey, Buff and Ivory.


About Catrin Jones

Assistant Editor

Check Also


RADMAG makes radiator protection more attractive

RADMAG is a simple and proven straightforward and inexpensive way of installing magnetic protection in …